4 November 2020
Healthcare organizations generate millions of tons of medical waste every year in the United States. A portion of this waste is considered biohazardous or infectious, and, in most states, must be treated before being sent to a landfill or waste-to-energy facility. There are several different medical waste treatment approaches depending on the type of material being generated. The most common method of treatment, autoclaving, is a safe and effective way to protect communities and the environment.
Autoclaves have a variety of uses depending on the type of business. In the healthcare industry, an autoclave is a machine that uses high pressure steam for a very specific period of time and temperature to kill pathogens, such as bacteria or viruses. This process disinfects the waste prior to final disposal.
Autoclaves are used in healthcare organizations for a variety of tasks, including sterilizing instruments and equipment. Waste management companies also use this equipment to treat biohazardous or infectious wastes prior to their final disposal destination. Pressurized steam is one of the most efficient and effective methods of treating medical waste.
Medical waste companies will typically supply a Department of Transportation (DOT) compliant container for the transportation of the waste from the medical facility, or generator, to their facility. Once at the medical waste facility, waste will be managed in alignment with the facility’s permit conditions, usually set by the applicable state regulatory agency. The facility will weigh the waste and then prepare it to be processed through their autoclave.
Once medical waste is placed in the bins that go inside the autoclave, air is evacuated from the vessel, creating a negative pressure. Next, high-pressure, high-temperature steam is introduced for a defined period of time. This validated time, temperature and pressure is designed to kill the pathogens found in the waste. The lack of air and high pressure ensure the steam penetrates into the material, raising the temperature throughout, not just on the surface. This is tested through a spore testing process discussed in further detail below.
Temperatures can range from 250 to 325 degrees Fahrenheit, and pressures can range from 40 to 80 PSI, depending on the autoclave size and amount of material. Waste is typically kept at a high temperature and pressure for 20 to 30 minutes. Once the cycle is complete, steam is evacuated from the autoclave, the pressure is released, and the autoclave is now safe to open.
The majority of regulated medical waste can be treated through an autoclave. This may include soiled bandages, gauzes, personal protective equipment or other items that are categorized as “red bag” waste. Sharps, including needles and syringes, can also be processed in an autoclave if they are not contaminated with hazardous waste.
However, some materials are not well suited for autoclaving, and it is recommended that these materials be separated out and processed by an alternative treatment technology, such as incineration. These materials could include pathological waste, trace chemotherapy wastes and tubing or needles.
It is also important that other wastes such as those which are considered hazardous waste under Environmental Protection Agency (EPA) Recourse Conservation Recovery Act (RCRA) regulations (e.g., organic solvents and laboratory chemicals) or radioactive wastes are never mixed with regulated medical waste. These types of wastes are highly regulated and are not suitable to be treated through the regulated medical waste autoclaving process.
After the autoclave treatment process, waste is compacted and sent to a landfill or waste-to-energy facility. Since the waste has been rendered non-infectious, it is safe to dispose of alongside other regular trash.
It is important that there are controls in place to ensure that the autoclave treats waste as intended. When the autoclave is initially set up, or any time the operating parameters are changed, the time, temperature and pressure must be validated with local regulatory authorities. Validating includes running a cycle and performing spore tests to confirm all waste is properly disinfected. Dual species spores, called Geobacillus stearothermophilus, are used to test the efficacy of its autoclaving process and to validate the appropriate settings. Due to the bacteria's high resistance to heat, it serves as a good indicator of microbial life after a steam cycle. Once validated, the approved parameters are programmed into the control system. Once this takes place, those parameters cannot be changed, except by going through the validation process again. Between each cycle, the operator confirms that each cycle ran properly and records this information in a daily log.
It is not uncommon for there to be requirements for quarterly, monthly or even weekly spore testing. Spore testing requirements may vary by state regulation or permit of the facility and should be done in accordance with the manufacture’s specifications.
Learn more about Stericycle’s approach to medical waste processing, and how Stericycle’s Biohazardous Medical Waste Disposal program can help you ensure compliance.
Interested in Our Solutions? We Can Help
Sign up to receive Stericycle’s latest news, tips and offers to help your business remain compliant
Which solution interests you?